Anyway. I bought a new 320gb 2.5" hard drive for my ps3 because my 80gb is full. Anyway. How should i go about this without losing any data besides the data i re-download? Anyone got some useful links for me? Thanks ahead of time.

i used a external HD and did the Backup option. put the new HD in then reloaded.

first you need to get a Sata 2.5 USB enclosure that make's it very easy to copy the data, and will allow you to use the 80 GB as a external flash drive.

this one here is $10.00

http://www.google.com/products/catalog?hl=en&q=usb+2.5+enclosure&cid=8885693598983377826&sa=title#p

there is many to choose from.

than:

follow these instruction's

All that available hard-disk space quickly disappears once you start downloading games, demos, and HD videos. Fortunately, Sony has designed the PS3 to allow console owners to perform their own hard-drive upgrades. You can go out and select your own hard drive instead of being forced to buy an official first-party hard-disk accessory. However, giving console owners that freedom means that aspiring upgraders will need to know how to select the right hard-drive upgrade and the proper installation technique.

Hard-disk manufacturer Seagate supplied us with a 160GB Momentus 5400.3 for our upgrade.

The first step to replacing the hard disk is going to the store or visiting an online retailer to pick up a new hard disk. The PS3 is compatible with just about any 2.5-inch SATA notebook hard disk. Both 5400-RPM and 7200-RPM drives should work fine. The physical size of the hard disk is important because it has to fit the PS3's 2.5-inch drive tray. As far as storage capacity goes, it doesn't make sense to go through the trouble of upgrading unless you go big: We're talking 120GB, 160GB, or even 250GB.

Once you have your upgrade drive, the next step is to back up the data on your current PS3 hard drive to an external storage unit. You can skip this step if you aren't attached to your music, videos, and game saves, but most of us will probably want to save all that information. The PS3 has a built-in software backup utility that can copy the PS3's hard-drive contents to an external storage device, such as a USB thumb drive or a memory stick. The removable storage device must use the FAT32 file system in order for the PS3 to recognise it. If you have an external hard drive that's formatted in NTFS, you can use the Disk Management utility in Windows to reformat the drive, but you'll need to create partitions on large external hard drives because Windows can only do FAT32 on drives 32GB or smaller.

Save your data using the PS3's backup utility.

If your storage device isn't large enough to handle a full system backup, you can selectively copy data over through the various music, photo, and game menus in the XMB. Your PlayStation Network login and system settings will remain safe on the system during the entire process. After you have your data safely backed up, you can move on to the actual hard-drive swap.

You will need a Phillips-head screwdriver to complete this part of the installation process. The PS3 owner's manual also includes step-by-step details on how to replace the hard drive, in case you need more instructions.

Turn off and unplug the system. Remove the plastic HD side-panel, and remove the blue screw.

Open the metal latch, move the drive tray to the right, and slide out the drive.

Remove the four screws that hold the hard drive to the tray. Use a screwdriver that fits snugly because the screws are extremely tight and easy to strip.

Swap in the new drive, and replace the screws.

Put the drive tray back into the system and slide it into place. Then replace the blue screw and snap the side panel back onto the system.

Turn on the console and let the system format the new drive. Then load up the PS3 backup utility to restore data from your external storage device back onto the PS3 hard drive.

At this point you should have a newly upgraded PS3 and the leftover hard drive. You could try selling the old drive, but small-capacity used drives might not fetch enough money to be worth the hassle of finding a buyer. If you still want to make the drive useful, you can buy an external drive enclosure to make it into a portable storage device.

1) Get external hard drive (big one)
2) Back up.
3) Take out old hard drive.
4) Put in new hard drive (carefully)
5) Restore data from external hard drive.

Thanks.. Im going to get a external HD.... seems like the easiest way.

How come Sony doesn't sell one of those easy peasy HDD transfer cables like for the Xbox 360?

Bookmarking For instructions later!

wait, I thought you r the TechGuy???

lol jk.

bookmarked for laterz!!

because there is not much of a need, when an external SATA 2.5 enclosure is so cheap it's $10.00.

besides if you than want to use your older harddrive as a flash drive with your PS3 you now can thank's to the external enclosure

Because Sony doesn't sell harddrives either. Microsoft sells extremely overly-expensive harddrive upgrades for people to waste money on and then are kind enough to sell you an overly expensive cable to help you transfer the data.

A 60gig MS HDD is more expensive than a 320Gig WD Scorpio Black 7200 RPM drive that takes all of 90 seconds to install in your PS3.