Is the Xbox One looks growing on you

[Adinnieken]

Chris Hu said:
Its fugly and bulgy but most of that extra bulge is there to prevent any overheating/RROD disaster. The first redesign will probably make it a lot smaller especially if the skip the 22nm chipset process and make their first redesign using 14nm chips which will probably be cost effective and widely available in late 2015. Another minor thing that bothers me about the design is that the camera lens on the Kincet 2.0 is not in the center.

It's essentially the same size as the original Xbox 360.

The disc slot is 120mm wide, both sides are equal, so that's a little more than 240mm In total or about 9 1/2".  Add to that, the extra space between, and you're looking at something probably close to 12".  Steve Totillo had mentioned that it was as deep as the orginal Xbox 360.  So, 10".  So the only question is how tall/thick it is, and my guess is pretty close to 3".

That depends on what you're talking about.  The Kinect 2's depth sensor is center-square of the Kinect face behind a plastic lens.  The RGB camera is off to the side.