rajendra82 said:
DVI and HDMI are cable compatible. Just get a cable with a DVI plug on one end and HDMI plug on the other, and then output sound seperately. In terms of quality VGA and component are equal as they are both analog connections that split the video signal into three (RGB in the case of VGA and YPbPr in the case of component). That's why the video quality of them is about the same and better than composite (which carries the entire video signal over a single cable). HDMI and DVI-D are both digital, and therefore better theoretically than either VGA or component. P.S.: Don't pay big money on the DVI/HDMI cable. A cheap one will work just as well as the rip offs. (i.e., Monster Cable) |
This is what I would do. You can find a cheap DVI to HDMI cable from www.newegg.com. Make sure you've got the proper male/female connector on DVI end. Then you'd need to jerry-rig the component cable that comes with the x360 (remove the plastic housing) so you can have both the hdmi plugged in and the component plugged in at the same time. The component will be used for audio.








